IQsocket

IQTS-IP200

Name: IQTS-IP200
Brand: IQtronic
SKU: IQTS-IP200-E

Ethernet smart socket with IP watchdog, web control and SNMP.

Active ProductIn Stock

ProducerIQtronic technologies Europe s.r.o.

Price on request

Socket Type

Ordering code

IQTS-IP200-E

Availability

In stock

Request Quote View Datasheet

Overview

IQTS-IP200 — Ethernet smart socket with IP watchdog, web control and SNMP.

IQTS-IP200 LAN/Ethernet smart socket with IP watchdog, HTTP web interface, SNMP control, scheduler and remote power restart. Regional socket versions.

IQTS-IP200 is an Ethernet smart power socket for remote switching and automatic restart of connected equipment. Control it through its built-in HTTP web interface or SNMP. Three independent ICMP watchdog rules can restart an unresponsive device; a time scheduler, NTP clock, event log and internal temperature sensor support unattended operation. Select the plug and socket version suitable for the installation. The maximum load depends on the version and the rating on its device label.

Socket Versions

Available socket versions

Select the required socket version in the product options. Available versions are shown below.

Base ordering code: IQTS-IP200-X

French

IQTS-IP200-E

Schuko

IQTS-IP200-F

Swiss (Type J)

IQTS-IP200-J

UK (Type G)

IQTS-IP200-G

USA (Type B)

IQTS-IP200-B

Italian (Type L)

IQTS-IP200-L

Availability may vary by version. Please confirm your selected socket type before ordering.

Applications

Real-world use cases

Server and network watchdog: Monitor a server or network device with ICMP checks. If it stops responding, the IP watchdog can automatically power cycle the equipment connected to the socket.
Industrial remote control via SNMP: Integrate the socket with a supervisory system: read its status via SNMP and use SNMP SET to switch or restart connected equipment remotely.
Recovery at unattended sites: Restart a router, modem, camera or gateway after a configured connectivity failure and review the event in the log.
Scheduled power control: Switch connected equipment on or off on selected days and at set times, with clock synchronization via NTP.
Network monitoring and alerts: Read operating status with SNMP GET and send an SNMP trap when a configured ICMP watchdog rule detects a fault.

Technical Specifications

Specifications

Full electrical and mechanical data is available in the datasheet.

Network	Ethernet 10Base-T, RJ45
Control	HTTP web interface, SNMP and local push button
Automation	Three ICMP watchdog rules, scheduler and NTP time sync
Power supply	90–250 V AC, 50/60 Hz
Switched output	Up to 16 A resistive load, depending on socket version; observe the device label
Environment	Indoor use, IP40; 0 to +50 °C