RS232 Watchdog Socket
Serial-port watchdog socket for automatic power restart of connected equipment.
- Production Started
- 2007
RS232 Watchdog Socket — Serial-port watchdog socket for automatic power restart of connected equipment.
RS232 watchdog socket for automatic restart of servers, routers and serial equipment. 230 V / 10 A output, 9600 baud RS-232, AT commands. Discontinued.
RS232 Watchdog Socket is an earlier IQtronic power socket for monitoring a device through its RS-232 serial port. The monitored device sends keep-alive characters; if no data arrive for two minutes, the socket interrupts its 230 V output for 10 seconds to restart the equipment. The output can also be switched or restarted with AT commands. The original manuals describe Linux and MikroTik examples. Production has ended; documentation remains available for installed units.
Specifications
Full electrical and mechanical data is available in the datasheet.
| Interface | RS-232, 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control |
|---|---|
| Watchdog | Restarts the output after 2 minutes without serial data; 10-second power interruption |
| Manual control | AT commands for on, off, restart and watchdog mode |
| Switched output | 230 V AC, maximum 10 A resistive load |
| Operating temperature | 0 to +50 °C |
Documents & software
Everything you need for installation, configuration and operation.
- PDFDownloadRS232-WATCHDOG-SOCKET-full-user-manual-en.pdfPDF